Video Connections; Connecting To The Hdmi Terminal; Selecting The Priority Video Output When Connecting Hdmi And Component Video - Sharp 10P01-CH-NG Operation Manual

Video Connections

Connecting to the HDMI Terminal

• You can enjoy high quality digital picture and sound through the HDMI terminal.
• See page 52 for information on the output of next generation audio formats.
• When you use AQUOS LINK, make sure to use a certified HDMI cable.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an HDMI cable (commercially available) to the HDMI terminals (1 and 2).
2
NOTE
• Audio transmitted in DTS-HD High
Resolution Audio and DTS-HD Master
Audio formats is output from the
HDMI terminal as Bitstream. Connect
an amplifier with a built-in decoder to
enjoy the fine sound quality.
• When using an HDMI output, 7.1 ch
Digital Output is available.
1
To HDMI OUT terminal
2
To HDMI IN terminal
After connecting
• Secure the HDMI cable to the HDMI cable holder, passing it through the holder. (Page 11)
• If desired, connect audio equipment. (Page 17)
• If necessary, perform the Audio Video Settings. (Pages 41–42)
• Refer to AQUOS LINK function. (Pages 22 and 43)
• Prepare the desired disc or content and start playback. (Pages 24–33)
14
HDMI cable
(commercially available)
Projector
TV
Equipment with an HDMI terminal
This Player
Selecting the priority video output when
connecting HDMI and Component video
When you connect both an HDMI cable and a
component cable to this player, you need to select
the priority video output in "Settings" – "Audio Video
Settings" – "Video Out Select". (See page 41.)
NOTE
• When you connect the player to a SHARP TV with an
HDMI cable only and the TV is turned on, the video output
switches to HDMI automatically. (The above setting is
unnecessary.)
• When you connect the player to a TV with an HDMI cable,
"HDMI Video Out" is set to "Auto". If you don't get a stable
image, select the desired resolution*.
When you set "HDMI Video Out" to a setting other than
"Auto", you can only select resolutions* that are compatible
with the connected TV.
* Refer to "HDMI Video Out" on page 41 regarding the
resolutions of the HDMI video output.
AV receiver