Displaying The Audio Information; Switching Subtitles - Sharp 10P01-CH-NG Operation Manual

Playback Functions
NOTE
• Some operations in the following playback functions
cannot be performed depending on the specifications of
the disc.

Displaying the Audio Information

You can display the audio information on the disc
currently being played back by pressing AUDIO.
• The displayed contents vary depending on the disc.
BD VIDEO DVD VIDEO
The audio channel currently being played back will be
displayed.
If multiple audio channels are recorded, you can switch
the audio channel by pressing AUDIO.
DVD-RW DVD-R
When a recorded broadcast with stereo or
monaural audio is played back:
"Stereo" is displayed. (Audio cannot be switched.)
NOTE
• When you play a program recorded in stereo or monaural,
and if you are listening to the Bitstream sound via the digital
output jack, you cannot select the audio channel. Set
"Audio Out" to "PCM" (Page 42), or if you want to change
the audio channel, listen via the analog output jacks.
• Settings for audio can also be changed in the Function
Control screen (Page 38).
• The operation of audio differs according to each disc. You
may need to refer to the operation manual of the disc.
• The display for audio information automatically disappears
after 5 seconds.
36

Switching Subtitles

BD VIDEO DVD VIDEO
If subtitles are provided in multiple languages, you can
switch between them.
Press SUBTITLE during playback.
• The display indicates the subtitle number currently being
played back, and the subtitles appear.
Each time SUBTITLE is pressed, the subtitles change.
• "–" is displayed if a disc has no subtitles.
• You can also select "Off".
NOTE
• Settings for subtitles can also be changed in the Function
Control screen (Page 38).
• The operation of subtitles differs according to each disc.
You may need to refer to the operation manual of the disc.
• The display for subtitle information automatically
disappears after 5 seconds.