Version; System; Communication Setup - Sharp 10P01-CH-NG Operation Manual

SETTINGS

Version

When you select "Version" the system software version
and Netflix ESN are displayed.

System

System Reset
You can reset all settings to the factory presets.
Item
Reset, Not Reset
Netflix Deactivate
You can deactivate your Netflix information on the
player.
Item
Yes, No
44

Communication Setup

This allows you to perform and/or change the
communication setting. This setting is required to use
BD-LIVE functions, the RSS reader function, Netflix
service and software updates that connect to the
internet.
NOTE
• Make sure that the LAN cable is connected to this Player.
(See page 18.)
• For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
− IP address, netmask, gateway, DNS address
• Besides, if specifying a proxy server, the following
information specified from your internet service provider is
also required. Confirm the information prior to the setting.
− IP address and port number of the proxy server
• Netflix service is not available when a proxy server is used
for an internet connection. (See pages 32–33.)
1
Press SETUP to display the Menu screen.
2
Press a/b to select "Settings", then press d or
ENTER.
3
Press a/b to select "Communication Setup",
then press d or ENTER.
4 Press ENTER, then press a/b to select
"Change", and then press ENTER again.
Current Ethernet setup info.
IP Address : Auto Setup
Netmask : Auto Setup
Gateway : Auto Setup
DNS : Auto Setup
Proxy : Not Use
• For initializing the current setting, select "Initialize",
then press ENTER.
Change
Initialize