Table of Contents
Advertisement
Using the operation panel in the print mode
The operation panel provides access to many of the printer's features
and functions. The basic procedure to access the printer's features
and functions is shown below.
READY TO PRINT.
DUPLEX
8
11
1.
1
2
2.
11
17
3.
8 14
1
2
ONLINE
PAPER SELECT
OFFLINE
FIERY PRINTER SCREEN
AR-C160 PRINTER
idle
5348MB
V1.0
info
How to select the paper type for the bypass tray
Before the paper type can be selected, paper must be placed in the
bypass tray and the key operator program "Enable Bypass-Tray
Type Detection" must be used to enable the selection (see page 33 of
the KEY OPERATOR'S GUIDE). Proceed as follows.
If the printer is in the copy mode, press the PRINT key to
1
select the print mode.
The basic screen of the print mode will appear.
Press the "ONLINE/OFFLINE" key on the touch panel to
2
switch the printer to the off-line mode.
Press the "fiery" key on the touch panel.
100%
3
Use the keys on the touch panel to select the desired
4
operation.
For details of the functions in the print mode, see the printer
operation manual.
To return to the printer basic screen, press the return (
key.
Press the PRINT key to select the print mode.
1
Press the "ONLINE/OFFLINE" key to enter the off-line
2
mode.
Press the "PAPER" key.
3
Use the touch panel to enter the paper type to match the
4
paper set in the bypass tray.
Press the "ONLINE/OFFLINE" key to restore the on-line
5
mode.
COPY MODE AND PRINT MODE
)
1-11
Advertisement
Table of Contents
