INSTALLATION INSTRUCTIONS
Complete the Installation
Connect the tailpiece and P-trap (not supplied).
Ensure that all connections are watertight.
Remove the aerator by turning it counterclockwise. Use the supplied key if required for removal of your
aerator.
Open the drain. Turn on the main water supply and check for leaks. Repair as needed.
Open both hot and cold valves and run water through the spout for one minute to remove debris. Check for
leaks in the flexible hose connections. Turn valves off.
Re-install the aerator.
Retain the key for future use.
1072016_2_C
6 of 6
INSTALLATION
Spout
Aerator
Key
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Wall-Mounted Basin Set
Spout
Aerator