Page 2
Observe all local plumbing and building codes. If needed, complete the fi nished wall before beginning this installation. KALLISTA reserves the right to make revisions in the design of products without notice, as specifi ed in the Price Book.
Page 3
Loosen the setcrew and slide the spout against the wall. Firmly tighten the setscrew. Remove the excess sealant. 1242695-2-A Questions? Problems? For additional assistance, please contact KALLISTA’s Customer 3 of 5 Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Page 4
Carefully tighten the spout using a strap wrench. Apply plumbers putty or sealant. Leave a small gap. Remove the excess sealant. 1242695-2-A Questions? Problems? For additional assistance, please contact KALLISTA’s Customer 4 of 5 Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Page 5
Open the valves and run water through the spout for a minute to remove any debris. Turn off the valves and reinstall the aerator. Keep the aerator key for future use. 1242695-2-A Questions? Problems? For additional assistance, please contact KALLISTA’s Customer 5 of 5 Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Need help?
Do you have a question about the P24814 and is the answer not in the manual?
Questions and answers