Printer Condition Settings - Sharp AR-208D Operation Manual

4 WEB FUNCTIONS IN THE MACHINE
Configuring the printer condition settings

Printer condition settings

Factory default settings are indicated in bold.
Default Settings
Item
Copies
Orientation
Default Paper Size
Default Paper Source
2-Sided Print
ROPM (Rip Once, Print
Many)
CO NT E N TS
Selections
1 - 999 This is used to select the number of copies.
Portrait, Landscape This sets the orientation of the printed page. Select [Portrait] when the image
is longer in the vertical direction, or [Landscape] when the image is longer in
the horizontal direction.
Invoice, Letter, This sets the default paper size used for the printed image. Even if the set size
Foolscap, Legal of paper is not in any of the trays, the printed image is formed in accordance
with this setting.
Auto, Set the default paper tray.
Tray 1, *Selections available depend on the trays that are installed.
Tray 2*,
Bypass (Auto)
1-Sided, When [2-Sided (Book)] is selected, two-sided printing takes place so as to allow
2-Sided (Book), binding at the left side. When [2-Sided (Tablet)] is selected, two-sided printing
2-Sided (Tablet) takes place so as to allow binding at the top. (Only for models that support
two-sided printing.)
Enable, Disable This enables the ROPM function. When enabled, multi-page print jobs are
stored in memory before printing, and thus the computer does not need to
repeatedly send the print data when multiple copies are printed.
I N D E X
Description
(part 4)
29