Printer Function - Sharp AR-5316 Operation Manual

Weight
Dimensions
Operating conditions
Noise level
Emission concentration
(measured according to
RAL-UZ62: Edition Jan.
2002)
* First copy out time is measured with original on the document glass in full ready condition with fuser at operating temperature
and mirror motor at operating speed, actual time may vary based on environment conditions.

Printer Function

Print speed*
Resolution
Memory
Emulation
Interface
Interface cables
* Print speed during printing of the second sheet and following sheets when using 8-1/2" x 11" plain paper and performing
continuous one-sided printing of the same page.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
Note
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Approx. 69.1 lbs. (31.3 kg)
(Not including TD cartridge)
23-15/64" (W) x 22-23/32" (D) x 18-33/64" (H)
(590 mm (W) x 577 mm (D) x470 mm (H))
Temperature: 59°F to 86°F (15°C to 30°C), Humidity: 20% to 85%
Sound Power Level L (1B=10dB)
wA
Copying: 6.2[B]
Standby: 3.1[B]
Sound Pressure Level L
pA
Copying: 48[dB(A)]
Standby: 16[dB(A)]
Sound Pressure Level L
pA
Copying: 50[dB(A)]
Standby: 18[dB(A)]
Noise emission measurement in accordance with ISO 7779.
3
Ozone: 0.02 mg/m or less
3
Dust: 0.075 mg/m or less
3
Styrene: 0.07 mg/m or less
12 ppm
600 dpi
16 MB
SHARP GDI
IEEE1284 parallel connector/
USB connector (USB1.1)
[Parallel cable]
Shielded bi-directional (IEEE1284) cable (max. length 3 m (10 feet))
Please purchase a commercially available parallel cable.
[USB cable (only for connection to USB 1.1 connector)]
Shielded twisted pair cable (max. length 3 m (10 feet))
(bystander positions)
(operator position)
APPENDIX
8
63