Error Messages - HP 83487A User Manual

Reference

Error Messages

Error Messages

The following error messages are for the plug-in module. Typically, the error
messages indicate there is a problem with either the plug-in or the mainframe.
This section explains what the messages mean and offers a few suggestions
that might help resolve the error condition. If the suggestions do not eliminate
the error message, then additional troubleshooting is required that is beyond
the scope of this book. Refer to the HP 83480A, 54750A Service Guide for
additional troubleshooting information.
Additional error messages are listed in the HP 83480A, 54750A User's Guide
for the mainframe.
Memory error occurred in plug-in_:Try reinstalling plug-
in
The mainframe could not correctly read the contents of the memory in the
plug-in.
1 Remove and reinstall the plug-in module. Each time a plug-in is installed, the
mainframe re-reads the memory in the plug-in module.
2 Verify the plug-in module is firmly seated in the mainframe slot.
3 Verify the knurled screws at the bottom of the plug-in module are finger-tight.
4 Install the plug-in in a different slot in the mainframe.
Busy timeout occurred with plug-in_:Try reinstalling
plug-in
The mainframe is having trouble communicating with the plug-in module.
Make sure there is a good connection between the mainframe and the plug-in
module.
1 Remove and reinstall the plug-in module.
2 Verify the plug-in module is firmly seated in the mainframe slot.
3 Verify the knurled screws at the bottom of the plug-in module are finger-tight.
4 Install the plug-in in a different slot in the mainframe.
5-10