Table of Contents
Advertisement
C A U T I O N
C A U T I O N
Getting Started
Getting Started
Getting Started
This chapter gives a description of the plug-in module, lists options and acces-
sories, explains menu and key conventions used, shows how to install your
HP 83487A optical/electrical plug-in module, and gives information for return-
ing the plug-in module for service.
Refer to
Chapter 2, "Channel Setup Menu"
plug-in module.
Refer to
Chapter 3, "Calibration Overview"
Refer to
Chapter 4, "Specifications and Regulatory Information"
tion on operating conditions, such as temperature.
This product is designed for use in INSTALLATION CATEGORY II and
POLLUTION DEGREE 2, per IEC 1010 and 664 respectively.
The input circuits can be damaged by electrostatic discharge (ESD).
Therefore, avoid applying static discharges to the front-panel input connectors.
Before connecting any coaxial cable to the connectors, momentarily short the
center and outer conductors of the cable together. Avoid touching the front-
panel input connectors without first touching the frame of the instrument. Be
sure that the instrument is properly earth-grounded to prevent buildup of
static charge. Refer to
1-2
for information on operating the
for calibration information.
"Electrostatic Discharge Information" on page
for informa-
5-12.
Advertisement
Table of Contents
