Advertisement
MOUNTING STREET WRAP GEN 2™ ON INCLINE OR VERTICALLY
When mounting Street Wrap Gen 2™ on an incline or vertically, two things must be prevented. First the Street Wrap Gen 2™ must be kept from sliding down, while still allowing
for expansion/contraction with temperature changes. Second, water must be sealed out with silicone since it will run down the top of the Street Wrap Gen 2™. Seal the middle
connectors to the upper Street Wrap Gen 2™ to keep water from penetrating.
0.6875
0.625
Measure from center of the hole.
Vertical Mount
Angle Bracket
Drill one (1) hole in the end cap on the bottom end of the run to allow water to escape.
7
Advertisement
