4. Cut the orange wire, then strip and tin 5mm off each other wire (see picture below).
5. Take the Flat 06 Way 250mm cable assembly and cut off one of the plugs. Strip and tin 5mm off each
wire (see picture below).
6. Using the table below, solder each wire together as follows (see next page):
10 pin IDC socket to wire assembly
Red wire
Blue wire
Yellow wire
Green wire
Flat 06 way 250mm cable assembly
to wire 1 (wire with the red stripe on it)
to wire 2
to wire 3
to wire 4
55