Cambridge Audio Azur 740A Technical Specifications

Tech specs
Azur 740A features
Features
100 watts per channel
7 audio inputs, twin binding posts for A and B speakers
Silicon gate control for volume/input selection providing
accurate channel balance and eliminates crosstalk and distortion
CAP5 – Five way protection system (DC detection, over
temperature detection, overvoltage/overcurrent detection, short circuit
detection, intelligent clipping detection)
Massive oversized torodial transformer
Control Bus In/Out, IR Emitter and A-Bus
room outputs for custom installation
Customisable input/source naming
Input gain trim allows input levels to be harmonised and balanced
Pre-outputs for connecting additional power amplifiers
Adjustable LCD brightness
Full-function aluminium face Azur Navigator remote control
which can control an iPod
Available in Silver/black
ATF™ is a trademark of Analog Devices
Issued: Jaunuary 2007
Cambridge Audio's policy is one of continuous improvement. Design and
specifications are therefore subject to change without prior notice.
Azur 740A Advanced
Integrated Amplifier
TM Ready multi-
TM in a docking station
w w w . c a m b r i d g e - a u d i o . c o m
Performance
Power output:
THD (unweighted): <0.001% 1 kHz at 80% of rated power
<0.01% 20 Hz - 20 kHz at 80% of rated power
Frequencey response:
S/N ratio:
Input impedances:
Power amp damping factor:
Max power consumption:
Minimum power consumption:
Bass and treble controls:
Max bass boost.cut +/- 10dB at 10 Hz
Max treble boost/cut +/- 7.5 dB at 20 kHz
Dimensions: (H x W x D) 115 x 430 x 350mm (4.5 x 16.0 x 13.8")
Weight:
Hankey Place, London, SE1 4BB, England
100W RMS into 8 Ohms
150W RMS into 4 Ohms
10 Hz - 50 kHz +/- 1 dB
(ref 1 W/8 Ohm) > 96 dB
Inputs 1-6 68 k0hm
Tape Input 68 k0hm
> 110 at 1 kHz
750W
Active (no signal) 45W
Standby 6W
Shelving type
10.7kg (23.5Lbs)
Cambridge Audio
© 2006 Cambridge Audio Ltd