Reduction/Enlargement/Zoom - Sharp AR-162 Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

Reduction and enlargement ratios can be selected either automatically with
the AUTO IMAGE (
selector ( , ) keys and/or the zoom (
enables precise copy ratio selection from 50% to 200% in 1% increments.
16
) key or manually with the PRESET RATIO
, ) keys. The zoom function
Automatic
Place the original on the original table and close the
1
platen cover.
Press the ORIGINAL SIZE ENTER (
2
indicator for the size of the original on the original table
lights up.
Use the TRAY SELECT (
3
with the desired paper size.
This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
Press the AUTO IMAGE (
4
The copy ratio will be automatically set.
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
Enter the number of copies.
5
Press the START (
6
) key to select the paper tray
If the orientation of the original does not correspond to
standard reduction/enlargement ratios for the selected
paper tray, then the ORIGINAL SIZE indicator will
blink. Change the orientation of the original.
However, if an optional electronic sorting kit is installed,
the original image may be automatically rotated.
) key.
To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE (
When copying from an optional SPF with this feature,
the automatic reduction/enlargement mode will be
automatically cancelled after copying is complete.
) key until the
) key.
) key again.