Controlling Data Usage - Sony Xperia XZ F8331 User Manual

Make sure that your device and the other Bluetooth® device are paired with
each other and that mobile data traffic is activated on your device.
: From your
Find and tap >
slider to enable the function.
: Set up the device so that it obtains its network connection
using Bluetooth®. If the device is a computer, refer to the relevant instructions
to complete the setup. If the device runs on the Android™ operating system,
tap the settings icon beside the name of the device that it is paired with under
> >
: Tap next to the paired device. Then, mark the internet
access checkbox. Wait for
setup is complete.
To stop sharing your mobile data connection, tap the
again to disable the function.
The function is turned off every time you turn off your device or turn off the
Bluetooth® function.
For more information about pairing and turning on mobile data traffic, see
with another Bluetooth® device on page 110 and To add a virtual private network on
page 43.
From your , tap
Find and tap >
Tap
Enter the
To select a security type, tap the
Tap .
Tap , then tap the
If prompted, tap to confirm.
Wi-Fi® hotspot is active.
Make sure that your device is functioning as a portable Wi-Fi® hotspot.
From your , tap
Find and tap >
.
Under
secured by a password.
Tap , then follow the relevant instructions. Alternatively, tap
> , then enter the PIN that appears on the WPS-supported
device.
From the , tap
Find and tap >
Tap
Enter the
To select a security type, tap the
If required, enter a password.
Tap .

Controlling data usage

You can keep track of the amount of data transferred to and from your device over
your mobile data or Wi-Fi® connection during a given period. For example, you can
view the amount of data used by individual applications. For data transferred over
This is an Internet version of this publication. © Print only for private use.
, tap .
>
, then mark the
to appear in the status bar. Once it appears, the
.
>
>
information.
field. If required, enter a password.
slider to enable the function.
appears in the status bar once the portable
.
>
, make sure that your portable hotspot is
.
>
>
for the network.
field.
41
and then tap the
checkbox.
slider
To pair your device
.
.
>
.
.