Table of Contents
Advertisement
1.4 3G-SDI Loop Through (J10)
The output connector J10 is used for the 3G-SDI loop though output. The output for the
EB-GS3471-00 evaluation board is capable of the following standards:
•
SMPTE 424M
•
SMPTE 292M
•
SMPTE 259M
The EB-GS3471-00 evaluation board supports DVB-ASI at 270Mb/s and data rates from
270Mb/s to 2.97Gb/s. The output is configured for a single ended coaxial cable
terminated with a BNC connection.
1.5 Video Header (J1)
Parallel video data with the PCLK and timing signals H, V, and F are available on a 60-pin
connector (J1). Using AB-GS3471-00 will allow the EB-GS3471-00 to interface to legacy
evaluation boards.
Pin 2
Pin 2
Pin 1
Pin 1
Figure 1-4: Video Header
Table 1-3: Pin Out Video Header
Pin Number
J1.1, J1.3, J1.5, J1.7, J1.9,
J1.11, J1.13, J1.15, J1.17,
J1.19, J1.21, J1.23, J1.25,
J1.27, J1.29, J1.31, J1.33,
J1.35, J1.37, J1.39, J1.41,
J1.43, J1.45, J1.47, J1.49,
J1.51, J1.53, J1.55
J1.2
J1.4
J1.6
J1.8
J1.10
J1.12
J1.14
GS3471
Evaluation Board User Guide Rev.3
PDS-061243
March 2018
Face view
Face View
Net Name
CORE_GND
DATA[0]
DATA[1]
DATA[2]
DATA[3]
DATA[4]
DATA[5]
DATA[6]
www.semtech.com
Pin 60
Pin 60
Pin 59
Pin 59
Proprietary & Confidential
8 of 22
Semtech
Advertisement
Table of Contents
