Safety Information; Important Safety Information; Handling The Verifast™ Microview - CenterLine VeriFast MicroView 1.0 User Manual

Safety Information

Important Safety Information

The VeriFast™ MicroView 1.0 controller is used in conjunction with welding equipment and
machinery. Therefore, as a supplement to the safety information offered in this manual for the
VeriFast™ MicroView controller, all the safety considerations that pertain to the equipment used in
conjunction with this device still apply and must be followed thoroughly.
Furthermore, all the existing plant safety regulations and other safety instructions from suppliers
whose components are used with or around the VeriFast™ MicroView controller must be followed
accordingly.
Any instructions contained in this manual that directly conflict with any other known safety
procedures should be brought to CenterLine's immediate attention for clarification.
Handling the VeriFast™ MicroView
In order to prevent potentially serious personal injury, the VeriFast™ MicroView 1.0 should be
handled, installed, and operated according to the guidelines outlined in this document. Failure to
follow the guidelines set forth here will bear unexpected and potentially dangerous results.
TM
VeriFast
• Equipment is not to be modified, adapted, or changed without
consulting the relevant sections of this manual or the manufacturer
(please refer to the inside front cover of this manual for CenterLine
contact information).
• Before any installation, maintenance, or repair work is started, all
sources of energy should be removed from the equipment using
proper LOCKOUT procedures for electrical, pneumatic, and water
services.
• Pneumatic and cooling water lines represent potential hazards.
Ensure all air and water lines are properly connected and secured
prior to turning ON these services.
CAUTION! Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
MicroView 1.0 – User Manual – Version 1.9
9