Configuring the 1762-IR4 Module Using RSLogix 500
B-5
Use the Calibration tab (Cal) to disable cyclic calibration. For more
information on the autocalibration feature, see Selecting
Enable/Disable Cyclic Autocalibration (Word 4, Bit 0) on page 3-20.
Generic Extra Data Configuration
This tab re-displays the configuration information entered on the
Analog Input Configuration screen in a raw data format. You have the
option of entering the configuration using this tab instead of the
module Configuration tab. You do not have to enter data in both
places.
Publication 1762-UM003A-EN-P - February 2003