Table of Contents
Advertisement
Appendix - Windows TCP/IP Setup
Before ensure your TCP/IP settings correct, please check DLB-1200's IP Address with your network administrator, and ask
your ISP for DNS Address or Address before making the following changes.
A、Checking TCP/IP Settings - Windows 9x/ME
1.
Select "Control Panel" -"Network
and Dial-up Connections", then
click "Properties".
2.
Select the TCP/IP protocol for
your network card.
3.
Click on the Properties button.
4.
If the DNS Server fields are
empty, select Use the following
DNS server addresses, and enter
the DNS address or addresses
provided by your ISP, then click
OK.
5.
On the Gateway tab, enter the
DLB-1200's IP address in the
New Gateway field and click Add.
(Your LAN administrator can
advise you of the IP Address they
assigned to the DLB-1200.)
Advertisement
Table of Contents
