Dahua IR Bullet Network Camera Quick Start Guide 1 Packing List Device × 1 USB ×1 Power Adapter ×1 QSG ×1 Iron Plate(for magnetic installation) ×1 Screw Package ×1...
Dahua IR Bullet Network Camera Quick Start Guide 2 Product Appearance Figure 2-1 Figure 2-2 Figure 2-3 The following table shows more information about each component. Component Name Speaker Lens IR (Infrared Ray) LED Indicator light Microphone USB power slot Reset/ WPS (Wi-Fi–Protected...
Page 4
Dahua IR Bullet Network Camera Quick Start Guide Table 2-1 Note To reset, long press for 8 seconds till the light is off; to enable WPS, just press the button. The following table shows more information about status of indicator light.
Dahua IR Bullet Network Camera Quick Start Guide Operation by Easy4ip To operate the device from your smart phone, do the following: Power on the device with power adapter connected. Connect your smart phone to your Wi-Fi network, and then scan the “Easy4ip”...
Page 6
Dahua IR Bullet Network Camera Quick Start Guide Scan the QR code on the back of the device to get the SN (Serial number). You can also tap Continue without scanning and manually input the SN on the next screen.
Page 7
Dahua IR Bullet Network Camera Quick Start Guide Tap Yes, config Wi-Fi and type your Wi-Fi password, and then tap Next. Note During the Wi-Fi connecting process, please keep your smartphone and the camera within 30 cm. Figure 3-5 Figure 3-6 The device will be added to your account, see figure 3-7.
Dahua IR Bullet Network Camera Quick Start Guide 4 Device Installation Note Before installation, please make sure the installation environments can at least support 3x weight of the device. 4.1 Non-metal Surface To install the device on the non-metal surface, do the following: 1.
Page 9
Dahua IR Bullet Network Camera Quick Start Guide This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the C Series and is the answer not in the manual?
Questions and answers