Center Module Search - Panasonic WX-CH455 Operating Instructions Manual

w Center Module search
p
This product searches for an accessible Center Module via the Center Module in which
the ID is already registered. When an accessible Center Module is found, this product is
connected to that Center Module.
p p To use this function, it is necessary to register the ID in multiple Center Modules in
advance.
p p This setting is enabled when the Center Module model selection setting is set to
WX-CC411, WX-CC411A, WX-CC412 or WX-CC412A.
1
Rotate the microphone boom to turn off the power of this product.
2
Rotate the microphone boom while holding down the [P] and [VOL] buttons to
turn on the power of this product.
p ● The power indicator turns red and green alternately, and the lane indicator blinks
orange rapidly.
Power indicator
3
When an accessible Center Module is found, the power indicator turns red and
green alternately, and the lane indicator blinks orange slowly.
p ● After 5 seconds, this product restarts automatically and accesses the Center Module
searched for.
Note
p p The ID of 1 unit of the headset and (or) the Belt Pack can be registered in up to 30
Center Modules. The Center Module not accessed for the longest time is overwritten
when the ID is registered in the 31
p p In the case of a Center Module in which this product's ID has not been registered, the
voice message "Failed" is heard from the earphone, and the power indicator blinks red.
WX-CH455_PGQX2221ZAC1.indb 31
[VOL] button
[P] button
Lane indicator
Center Module.
st
31
2017/08/21 16:11:10