Panasonic WX-CH2050 Instructions Manual

Panasonic WX-CH2050 Instructions Manual

All-in-one headset
Hide thumbs Also See for WX-CH2050:

Advertisement

Quick Links

Before attempting to connect or install this product,
please read these instructions carefully and save this manual for future use.
CAUTION
It is a violation of Federal Law to begin operating this sys-
tem prior to obtaining an FCC Radio License. The FCC ID
number for this radio equipment is listed below.
FCC ID: ACJ9TAWX-CH2050
ATTENTION:
A lithium-ion battery that is recyclable powers
the product you have purchased. Please call 1-
800-8-BATTERY for information on how to recy-
cle this battery.
The serial number of this product may be found in the bat-
tery compartment of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No.
WX-CH2050
Serial No.
CONTENTS
INTRODUCTION ..................................................................1
FEATURES ...........................................................................1
PRECAUTIONS ....................................................................2
NAMES & FUNCTIONS ........................................................2
OPERATING PROCEDURES................................................4
G Preparations .................................................................4
BATTERY LOADING & REPLACEMENT ..............................6
MAINTENANCE....................................................................6
TROUBLESHOOTING ..........................................................7
SPECIFICATIONS ................................................................7
STANDARD ACCESSORIES ................................................7
OPTIONAL ACCESSORIES..................................................7
SETUP PROCEDURES .........................................................8
G Opening the Switch Pocket..........................................8
G Channel Group Selection .............................................8
G DIP Switch Setup..........................................................9
G Channel Interference Check ........................................9
G Operation Mode Setup...............................................10
[PAGE] .....................5
Model No.

INTRODUCTION

The WX-CH2050 is an all-in-one headset designed for use
in wireless communication systems, which are use in Drive-
thru menu boards, etc. It incorporates such necessary
devices as the battery compartment and control buttons
besides the microphone and earphone. The built-in anten-
nas, transmitter, and receiver enable you to communicate
with other store personnel and the customer by audio.

FEATURES

• Compatible center modules: WX-C1010, WX-C1011,
and WX-CC2010
• Less noise and interference thanks to the use of UHF
band
• Easy frequency setting by use of phase locked loop
(PLL)
• A/B channel selection available for convenience of dou-
ble drive-through (DDT)
• Talk mode selectable between talk-lock and press-to-
talk
• Page mode selectable between page-lock and press-
to-talk
• Easy-to-replace cushions: head pad cushion, earphone
cushion, and windproof cushion
All-in-One Headset
WX-CH2050

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic WX-CH2050

  • Page 1: Table Of Contents

    INTRODUCTION Model No. WX-CH2050 The WX-CH2050 is an all-in-one headset designed for use Serial No. in wireless communication systems, which are use in Drive- thru menu boards, etc. It incorporates such necessary...
  • Page 2: Precautions

    Fully charge installers. the battery. Failure to do so may shorten the operating • Use only Panasonic authorized batteries like the time. rechargeable Li-ion 3.7V normal type or long life type.
  • Page 3 q Head Band and Head Pad !1 Power Button and Indicator [POWER] Adjustable to your head by sliding the head pad Pressing the button for one second will turn on or off the headset. The indicator shows the status as follows. w Battery Lock [EJECT] Green On: Power is supplied, and the headset When removing the battery, slide the lock to the out-...
  • Page 4: Operating Procedures

    OPERATING PROCEDURES 3. Wear the headset and route the strap behind your neck. Notes: • Transmission using the talk [T] or page [P] button is allowed for a single headset at a time. A continuous beep or distorted sound will be heard in the headset that tries to transmit while another person is operating.
  • Page 5: G Communications With Customers [Talk]

    G Communications with Customers [TALK] G Communications with Other Store Personnel [PAGE] Any store personnel wearing the headset can bi-directional- ly communicate with the customer who is at the menu Store personnel wearing the headset can communicate board. with each other without being heard by customers. 1.
  • Page 6: Battery Loading & Replacement

    BATTERY LOADING & REPLACEMENT MAINTENANCE Notes: Head-pad cushion, earphone-pad, and microphone’s wind- • Refer to operating instructions included with the battery proof cushion can be easily replaced and should be and battery charger. exchanged as necessary. • Battery replacement is recommended when the power indicator lights up in red and a pulsing beep is heard in the headphone.
  • Page 7: Troubleshooting

    TROUBLESHOOTING Phenomenon Possible Cause What to do The power indicator blinks in red. A wrong channel is selected. Select a channel within 1 thru 8. If unsuccessful, consult your dealer for repairs. The power indicator lights up in red. The battery power is nearing to its end. Recharge the battery.
  • Page 8: Setup Procedures

    SETUP PROCEDURES Caution: Setup of this product should only be performed by qualified service personnel or system installers. G Opening the Switch Pocket 1. Press the power button to turn off the headset. 2. Open the switch pocket adjacent to the ear pad using the supplied screwdriver.
  • Page 9: G Dip Switch Setup

    G DIP Switch Setup SW#7: While talking with a customer in the TALK lock mode, you may need to contact store personnel in An eight-bit DIP switch is provided for system setups. The the PAGE mode that interrupts the TALK mode. This initial setting is marked with an asterisk *.
  • Page 10: G Operation Mode Setup

    G Operation Mode Setup The three operation modes can be set up to adapt the headset to your requirements. • Default channel setup • Talk lock/ Talk PTT (press to talk) • Page lock/Page PTT Indicator Selection Selected Mode Transition Exit A/B channel Power...
  • Page 11 1. Press the power button to turn off the headset. 2. While holding down the talk [T] and page [P] buttons simultaneously, press the power button to turn on the headset. The headset enters the setup mode where the indica- tors and buttons perform differently from the normal operation.
  • Page 12 Panasonic Digital Communications & Security Company PANASONIC CANADA INC. 5770 Ambler Drive, Mississauga, Unit of Matsushita Electric Corporation of America Ontario, L4W 2T3 Canada (905)624-5010 Information Systems Group Zone Office 1707 N.Randal Road, Elgin, IL 60123 (847) 468-5205 N0403-0 3TR001649AAA...

Table of Contents