Center Module Search - Panasonic WX-CH457P Operating Instructions Manual

Setting the unit
w Center Module search
p
The product searches for an accessible Center Module from among the Center Modules
on which the product's ID is registered. When an accessible Center Module is found, this
product is connected to that Center Module.
p p To use this function, it is necessary to register the ID in multiple Center Modules in
advance.
p p This setting is enabled when the Center Module model selection setting is set to
WX-CC411, WX-CC411A, WX-CC412 or WX-CC412A.
1
Rotate the microphone boom to turn off the power of this product.
2
Rotate the microphone boom while holding down the [P] and [VOL] buttons to
turn on the power of this product.
p ● The power indicator turns red and green alternately, and the lane indicator blinks
orange rapidly.
3
When an accessible Center Module is found, the power indicator turns red and
green alternately, and the lane indicator blinks orange slowly.
p ● After 5 seconds, this product restarts automatically and accesses the Center Module
searched for.
Note
p p The ID of 1 unit of the headset can be registered in up to 30 Center Modules. The
Center Module not accessed for the longest time is overwritten when the ID is
registered in the 31
p p In the case of a Center Module in which this product's ID has not been registered, the
voice message "Failed" is heard from the earphone, and the power indicator blinks red.
32
WX-CH457P_PUQX1020ZAV1.indb 32
Power indicator
Center Module.
st
[VOL] button
[P] button
Lane indicator
2021/07/02 14:31:24