RHINO DM112 Operator's Manual page 84

TRANSPORTING THE MOWER
1. Make sure the stand tube is secured in the "up" position. If not, pull clip and Pin (R) and slide Stand Tube
(A) up. Secure with Pin (R) and clip. (See Figure 19.)
2. Before folding check clearance between tractor & cover frame. Fold back the front cover frame (H) and cover
sheet. (See Figure 20.) Fold front & rear cover under front cover frame and secure with tarp strap stored under
center of rear cover. Attach to hole in center front cover frame.
WARNING! COVER SHEET HAS BEEN REMOVED IN THE PICTURE FOR ILLUSTRATION PURPOSES
ONLY. NEVER OPERATE MOWER IF COVER IS NOT SECURED IN PLACE AND IN GOOD
CONDITION.
DM 07-02
© 2004 Alamo Group Inc.
OPERATION
A
R
Figure 19
Figure 20
Operation Section 4-8
H