Pepperl+Fuchs VisuNet GMP RM/PC 200 series Hardware Manual page 36

VisuNet GMP RM/PC 200 series
Installation and Commissioning
Mounting flexible Patch Cable (in Case of using turnable Wall Arm)
Note!
In case of using a turnable wall arm apply flexible patch cable
Due to frequent monitor turning in live operation inflexible patch cable (1) is strained heavily
within the wall bracket (4). That may cause cable damage. Therefore, use flexible patch cable
(2).
1. Connect the network plug of the inflexible patch cable via adapter (3) to the flexible patch ca-
ble.
2. Connect the network plug of the flexible patch cable to the RJ45 interface of the monitor.
3
2
Figure 3.9
1 Flexible patch cable
2 Adapter
3 inflexable network cable
Connecting Cables to VisuNet GMP (Wall Arm)
Connect all cables correctly.
36
Mounting of flexible patch cable
1