Table of Contents
Advertisement
Inflowing medium
Product flow
Agitators
MAN-100048
Fig. 8: Mounting the instrument on insulated vessels.
1
Temperature isolation - max. 50 mm (1.97 in)
2
Ambient temperature on the housing
If SITRANS LVL200H is mounted in the filling stream, unwanted
false measurement signals can be generated. For this reason, mount
SITRANS LVL200H at a position in the vessel where no disturbances,
e.g. from filling openings, agitators, etc., can occur.
This applies particularly to instrument types with long extension tube.
Fig. 9: Inflowing medium
To make sure the tuning fork of SITRANS LVL200H generates as little
resistance as possible to product flow, mount the sensor so that the
surfaces are parallel to the product movement.
Due to the effects of agitators, equipment vibration or similar, the
level switch can be subjected to strong lateral forces. For this reason,
SITRANS LVL200H - Operating Instructions
2
1
17
Advertisement
Table of Contents
