Table of Contents
Advertisement
Moisture
14
Fig. 4: Horizontal mounting
1
Switching point
2 Marking on top with threaded versions, marking aligned to flange holes with
flange versions
1
Fig. 5: Horizontal installation (recommended mounting position, particularly for
adhesive products)
1
Switching point
2
Marking with screwed version, facing up
In the case of flange versions, the fork is aligned as follows.
Fig. 6: Fork position with flange versions
1 Marking with flange version, facing up
Use the recommended cables (see chapter "Connecting to power
supply") and tighten the cable gland.
You can give your instrument additional protection against moisture
penetration by leading the connection cable downward in front of the
cable entry. Rain and condensation water can thus drain off. This ap-
plies mainly to outdoor mounting as well as installation in areas where
high humidity is expected (e.g. through cleaning processes) or on
cooled or heated vessels.
To maintain the housing protection, make sure that the housing lid is
closed during operation and locked, if necessary.
Make sure that the degree of contamination specified in chapter
"Technical data" meets the existing ambient conditions.
SITRANS LVL200H - Operating Instructions
1
2
2
1
MAN-100048
Advertisement
Table of Contents
