Table of Contents
Advertisement
Wireless wall transmitter, 1-gang with inscription space, Wireless wall
transmitter, 3-gang with inscription space
The wall transmitter is reset to default setting. All the buttons are set as channel buttons.
6 Appendix
Remove empty batteries immediately and dispose of in an environmentally friendly
manner. Do not throw batteries into household waste. Consult your local authorities
about environmentally friendly disposal. According to statutory provisions, the end
consumer is obligated to return used batteries.
6.1 Technical data
Rated voltage
Battery type
Ambient temperature
Degree of protection
Transmitting range in free field
Radio frequency
Transmission capacity
Receiver category
6.2 Parameter list
The device parameters can be changed with the eNet server:
Device configuration
Parameter name
Function
Operating mode
Advanced settings
Parameter name
Manual commissioning
Extended channel settings
Parameter name
32579222
10864957
Setting options, Basic
setting
Rocker, Other modes, Unused
Basic setting: Rocker
App use, lock-out protection,
forced operation, wind alarm,
sun protection, twilight
Basic setting: App use
Setting options, Basic
setting
On, Off
Basic setting: On
Setting options, Basic
setting
24.04.2017
1×Lithium CR 2450N
-5 ... +45 °C
typ. 100 m
868.0 ... 868.6 MHz
max. 20 mW
Explanations
Rocker
The channel works as a
channel button. Setting is
always made in pairs.
Other modes
The channel works as a scene
button. Setting is always made
in pairs.
Unused
The channel is not displayed
in the eNet SMART HOME
app and is disabled for use in
the commissioning interface.
Setting the type of scene used
for a scene button. Setting is
always made in pairs.
Explanations
Disables manual
commissioning for all device
channels.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Explanations
DC 3 V
IP 20
2
8/10
Advertisement
Table of Contents
