Table of Contents
Advertisement
PSMAA10NA
IMPORTANT: In order to use and set up the alarm system, SMS
texting will be used. The use of SMS texting costs money. Consult
your carrier for the cost.
IMPORTANT: The android and/or Apple App both make use of SMS.
Turning on the control panel
Connect the power adapter to the connector in the back of the system.
Then slide the power switch to 'On'.
Network connection (indicator)
After switching on the system, the network indicator is steady on.
This indicates that the control panel is searching for a network. When
connected to a network the LED indicator will flash once every second.
Note:
1. The control panel will sounds a long beep once per 15 seconds to
indicate network disconnection, you can disarm the control panel to
stop this sound notification once.
You can also turn on or turn off this function permanently by following
the steps below.
Turn off: Press "7400" +
button +
button on the control panel
Turn on: Press "7401" +
button +
button on the control panel
2. Make sure the security code of the SIM card is permanently
deactivated.
Settings inquiry by SMS
The settings of the alarm system can be changed by simply sendind
an SMS with a mobile phone. You can request an entire menu for
13
Advertisement
Table of Contents
