Resetting The System - Sony HT-S100F Operating Instructions Manual

K:\081\Win7 CS\new\4727410111_HT-S100F_US-CaFR-
LaES\01US\090TBS.fm
010COV.book Page 31 Thursday, September 7, 2017 11:33 AM
The system does not work properly.
 The system may be in demo mode. To
cancel demo mode, reset the system.
Press and hold  (power), +, and
on the Bar Speaker for more than 5
seconds (page 31).
When you change to the TV input
from the USB input by pressing
INPUT, the message appears.
* This screen is an example for English.
 Select the TV program by using the TV
remote control.

Resetting the System

If the system still does not operate
properly, reset the system as follows.
1
Press and hold , +, and
the Bar Speaker for more than 5
seconds.
All indicators on the Bar Speaker
flash 3 times, and the settings
return to their initial status.
2
Disconnect the AC power cord
(mains lead).
3
Connect the AC power cord (mains
lead), then press  to turn on the
system.
Tip
The default settings are underlined on
each feature description.
masterpage:
Right
on
31
US
HT-S100F
4-727-410-11(1)