Sony HT-S100F Operating Instructions Manual page 2

Owner's Record CAUTION
Risk of explosion if the battery is
The model and serial numbers are
replaced by an incorrect type.
located on the bottom of the Bar
Do not expose batteries or appliances
Speaker. Record the serial numbers in
with battery-installed to excessive
the space provided below. Refer to
heat, such as sunshine and fire.
them whenever you call upon your Sony
dealer regarding this product.
Indoor use only.
Model No. HT-S100F
For the Bar Speaker
Serial No.
The nameplate and date of
manufacture are located on the bottom
of the Bar Speaker.
WARNING
For the customers in the U.S.A.
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
The unit is not disconnected from the
mains as long as it is connected to the
The Caution Marking is put on the
AC outlet, even if the unit itself has been
Bottom Enclosure (For the Bar Speaker).
turned off.
To reduce the risk of fire, do not cover
the ventilation opening of the appliance
with newspapers, tablecloths, curtains,
etc.
Do not expose the appliance to naked
enclosure that may be of sufficient
flame sources (for example, lighted
magnitude to constitute a risk of electric
candles).
shock to persons.
To reduce the risk of fire or electric
shock, do not expose this appliance to
dripping or splashing, and do not place
objects filled with liquids, such as vases,
on the appliance.
instructions in the literature
accompanying the appliance.
As the main plug is used to disconnect
Important Safety Instructions
the unit from the mains, connect the
1) Read these instructions.
unit to an easily accessible AC outlet.
2) Keep these instructions.
Should you notice an abnormality in the
unit, disconnect the main plug from the 3) Heed all warnings.
AC outlet immediately.
4) Follow all instructions.
5) Do not use this apparatus near
Do not install the appliance in a
confined space, such as a bookcase or
6) Clean only with dry cloth.
built-in cabinet.
2 US
This symbol is intended to alert
the user to the presence of
uninsulated "dangerous
voltage" within the product's
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
water.
HT-S100F
4-727-410-11(1)
HT-S100F
4-727-410-11(1)