Folding The Walking Frame; Height Adjustment; General Safety - aidapt VP129F Fixing And Maintenance Instructions

FOLDING THE WALKING FRAME

Before use, ensure the walking frame is fully folded out. To do so, pull the side away from the front of the
walking frame and ensure it is locked in position. Repeat for the other side. (see fig. 2, 3 & 4)

HEIGHT ADJUSTMENT

To adjust the leg height:
1. Push both locking clips inwards and extend or retract to your desired height.
2. Once adjusted to your appropriate height, release the locking clips and ensure the leg is locked in
position, repeat this until all four legs are at the same height.
3. Ensure all legs are locked in position before use (See fig 5).

GENERAL SAFETY

1. Use a chair with a high seat and arms to assist when sitting or standing
2. Ensure there are no loose articles on the floor, for example loose rugs, draught excluders and work
floor coverings, if so, please remove before use of walker
3. Ensure there is adequate lighting in your household especially in hallways and stairwells
4. Wear comfortable, flat and supportive shoes
5. Avoid wet, slippery and uneven surfaces
6. Do not store this product in temperatures below freezing
7. Take special care if carrying a bag or similar package while using the walker
Fixing and Maintenance Instructions
fig. 2 fig. 3
3
fig. 4
fig. 5