Denso UR21-MR-01 User Manual page 16

(3) Plug the AC adapter into the controller's power jack.
When the AC adapter is plugged into the outlet, its power is turned on.
Note:
Run the cable through the cover in advance and then connect it.
(4) Attach the cover to the controller's connector.
 Align the protrusions on the cover with the screw
holes in accordance with the mounting position
of the controller.
Note:
(1) When removing the connector and DC plug, hold the connector. If you hold the cable when removing, this may cause a broken
wire.
(2) The connector should be attached/removed only when absolutely necessary. Doing so frequently may result in a loose
connection.
 Fasten the cover to the controller using the
screw included in the package.
(recommended torque: 0.25 to 0.50 N-m)


- 7 -