Troubleshooting - Zephyr Z-1171-G Instruction Manual

TROUBLESHOOTING

Symptoms
The metal parts in the
tank have rust.
Water leaks from the
bottom of coffee
maker.
Water leaks out of
outer side of filter.
Acid (vinegar) taste
exists in Espresso
coffee.
The coffee maker does
not work.
The steam cannot
froth.
Do not take apart the appliance by yourself. If the power cord is damaged or the
appliance malfunctions, contact the authorized service facility.
Cause
The used descaling agent was not of
recommended type. It may cause
corrosion of the metal parts in the
tank.
There is a lot of water in the drip
tray.
The coffee maker malfunctions.
There is some coffee powder on
filter edge.
There is descaling agent left in the
piping.
The coffee powder is stored in a
hot, wet place for a long time. The
coffee powder turns bad.
The power plug is not plugged well.
The steam ready indicator is not
illuminated.
The container is too big or the
shape is not fit.
You have used skimmed milk
_English_
Solution
Use descaling agent
recommended by the
manufacturer.
Please clean the drip tray.
Please contact the authorized
service facility for repairing.
Clean the filter edge.
Clean the machine by
repeating step 9 and 10 from
"CLEANING MINERAL
DEPOSITS"
Please use fresh coffee
powder, or store unused coffee
powder in a cool, dry place.
After opening a package of
coffee powder, reseal it tightly
and store it in a refrigerator to
maintain its freshness.
Plug the power cord into a
wall outlet correctly, if the
appliance still does not work,
please contact the authorized
service facility for repairing.
Only after the steam ready
indicator is illuminated, the
steam can be used to frothing.
Use high and narrow cup.
Use whole milk or
half-skimmed milk