Table of Contents
Advertisement
1
2
Web UI Header Diagram
1. Persistent Remote Control Bar
This area provides access to change some
settings without having to access the remote
control page. Change Source, Preset, Theater,
Profiles within each theater, and Surround
modes.
2. Volume Control
Volume control is provided without having
to access the Remote Control page. The + /
- buttons adjust volume in 1dB increments. The
++/-- adjust volume in 3dB increments. Mute
cuts all sound. Dim attenuates the volume by
the amount specified in "Parameters" on page
27.
3. Configuration Section
•
System: indicates information about the system such
as firmware version, any installed licenses, network
parameters. System configuration backups and
firmware updates are also done here
•
Inputs: Configure input names, map physical inputs
to source components, and make input dependent
settings.
•
Main Speakers: Configure primary theater, child
theaters, audio/video and audio only zones. This is
where you map analog outputs to physical channels.
•
Settings: Configure trigger behavior, HDMI, IR, and
other system wide parameters.
8
3
4
5
•
•
•
•
4. Trigger / Generator / Power / Restart
•
•
Presets: Build presets that easily recall combinations
of Theaters, downmix zones, EQ profiles, triggers and
surround upmix behavior. Presets offer customers
the easiest way to place their system into modes for
different types of listening.
Monitoring: If the optional Theater Diagnostic
Kit is purchased and the StormMonitoring license
is installed, this page gives real time and logged
statistics on the health and performance of the
SP4 which can be accessed via the local network
or via remote network access which makes system
diagnostic endeavors less speculative and much
more concrete.
Remote Control: A copy of the page available to
anyone logging into the web UI regardless of their
credentials level. The only difference between this
page and the one available without logging in is that
the Persistent Remote Control Bar remains at the top.
Alternate Theater: If the optional 16 channel RCA
Output Card is installed, you will see an Alternate
Speakers tab to the right of Main Speakers. Setup
for the Alternate Speakers is identical to that of Main
Speakers.
Trigger: Any triggers configured in Settings
(Configuration Section) for Manual Switching appear
here giving you easy access to activate or deactivate
these triggers with a click. Green indicates that the
trigger is in the active state. White indicates that it is
not.
Generator: When white, the SP4 built in noise
generator is not active. When green, it is active. This
is an indicator. The generator cannot be switched on
from here.
6
Advertisement
Table of Contents
