Web Ui Remote Control - Bryston SP4 Owner's Manual

Immersive surround processor
Hide thumbs Also See for SP4:
Table of Contents

Advertisement

1
2
3
4
5

Web UI Remote Control

Using any modern device with a web browser,
one can access the remote control. When not
logged in as an expert user or installer, the remote
is accessible as well, but the header (above Main
Source) is not visible. The web UI remote control is
best used with a computer or tablet. It can be used
with a mobile phone, but items do not properly fit
the screen. iPad users can also download the iPad
app from the app store.
1. Input Select
Any inputs enabled on the Inputs setup page
will appear here titled according to your setup.
See "Input Settings" on page 12. The currently
selected input will be highlighted in blue. Tap
any input to select it.
2. Power
Toggle the standby/ON status by pressing this
button.
3. Main Volume
Adjust the volume in the currently selected
theater by pressing the +/- buttons. One press is
a 1dB increment.
4. Mute / Dim / Loudness / CEQ / LFE Dim
This section contains easy access to select
features.
30
Mute: Cuts sound to the currently selected theater.
Vol Dim: Immediately attenuates volume by the
amount specified in "Parameters" on page 27.
Default is -20dB.
Loudness: Boosts bass and treble to sound more
impactful when listening at lower levels (green curve)
Cinema EQ: Compensates for mixes that sound too
bright in smaller rooms by slightly attenuating audio
above approximately 5 kHz (pink curve).
LFE Dim: In some cases, movies encoded with Dolby
may have bass that appears to be too loud. Use LFE
Dim to attenuate the LFE channel by -10dB.
5. Preset & Audio Decoder Options
Use the Preset dropdown menu to select the desired
preset. Remember that Preset includes activating
a specific theater, so if your SP4 includes multiple
theaters, you should have presets available for each.
See "Presets" on page 28.
Audio Stream: Indicates real time information about
the incoming audio of the selected source.
Preferred Upmix: Native plays audio back in the
recorded format and/or channel count according to
8
7
6

Advertisement

Table of Contents
loading

Table of Contents