Related Manuals for Data-Tronix DT-IPTV-QAM-ASI-2H
Summary of Contents for Data-Tronix DT-IPTV-QAM-ASI-2H
- Page 1 USER GUIDE AND MANUAL Dual Input HD Digital Encoder-Modulator with ASI MODEL: DT-IPTV-QAM-ASI-2H Version 1.0 Last Update: 01-15-2019 DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019...
- Page 2 • 24/7/365 Live Technical Service Support • Expertly Trained and Highly Knowledgeable Sales and Support Team • Full Product Line of Cable and Satellite Infrastructure Products • Customized Site-Survey Process to Ensure Project Success DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019...
-
Page 3: Table Of Contents
Hardware Installations and Connections ......................8 DEVICE Programming and Setup ......................... 9 Encoder Programming and Setup via GUI Interface: ................9 Overview Page of DATA-TRONIX Encoder ....................10 Login Password: ..........................10 Common Setup ............................. 11 RF Setup ............................... 12 Encoder Setup .............................. -
Page 4: Safety Precautions
DO NOT cover or obstruct the device’s fan or fan openings. If the device has been in a cold environment allow it to warm to room temperature for at least 2 hours before connecting to an AC outlet. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 5: Package Contents
Package Contents This package contains: One DT-IPTV-QAM-ASI-2H HD Digital Encoder-Modulator One power cable User Guide and Manual Inspect the package before starting installation to ensure there is no damage and all supplied contents are present. Contact your distributor or dealer should the device be damaged or package contents are incomplete. -
Page 6: Product Description
Product Description DATA-TRONIX's DT-IPTV-QAM-ASI-2H Encoder/Modulators simultaneously provide a QAM, ASI, and IP output stream making it ideal for any Commercial RF or IP Networks. The high quality HD design allows for watching action packed movies and sports channels on any HDTV. The space saving design delivers 2 High Quality HD QAM/IP/ASI channels in a single 1RU space. -
Page 7: Specifications
Specifications *Subject to change without notifications *Manufactured under License of Dolby Laboratories DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 8: Installation
7. If your device is EAS equipped make the proper connections (contact replay and Video /Audio Inputs) to the EAS device. 8. Connect the included power cord to the unit’s POWER plug. 9. Connect the power cord to an appropriately rated AC power outlet. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 9: Device Programming And Setup
After connecting the device to the “Web Management” port located on the rear of the device and locating the device via the 'Network' tool in 'My Computer' Step 1: Right Click and Select “View device Webpage” DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 10: Overview Page Of Data-Tronix Encoder
Once the Common Setup Tab is selected you will be prompted to enter the user name and password for device. Login Password: Default User Name: admin Default Password: Admin123 Note: To change the Password for the GUI go to the Administration Tab DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 11: Common Setup
Example: Installer is required to change only the output channel for the device (No other changes to the device are required). Once the channel has been changed, the installer is required to perform 1) Local Save AND 2) Upload and Reboot. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 12: Rf Setup
Use the RF Setup Page to setup each RF Output. Select and set the required parameters you require for your installation. Step 6: Local Save Perform a Local Save once all parameters are set. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 13: Encoder Setup
Step 7: Encoder Setup Encoder Setup DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... - Page 14 NOTE: There will be an Encoder tab present for each input on the device. Step 8: Local Save for each Encoder tab Perform a Local Save on EACH Encoder Tab where changes were performed. ***** Ensure all Encoder tab changes have been locally saved DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019...
-
Page 15: Ip Streaming Setup
Destination IP, Port, and TTL settings. Step 10: Local Save Perform a Local Save once all parameters are set. ***** Ensure all Encoder changes have been locally saved before performing Step 11. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 16: Network Configuration
Save Config: Once all parameters are set you are required to select Save Config. This function will reboot and save the changes setting for the Network Configuration. Note: Only the Network Configuration changes will be saved. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 17: Administration
Step 14: Administration Administration DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 18: Saving Your Configuration Files
To upload a configuration file simply click “Choose File” then locate the file you want to upload. Click “Upload” to install the configuration files. This function is helpful to the installer when installing a large number of encoders in a single system. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 19: Front Panel Lcd Encoder Menu Map
Back to IP Destination Ratio Name Streaming Port HDCP Back to Long CH Setup Time to Live Encoder Name Closed Source ID Back to IP caption Streaming Back to Back to Setup Encoder Encoder DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 20: Modulator Configuration Via Front Panel Lcd
Use the Scroll Up/Down buttons to enter the password. Password is 0000. Press the Password – OK button for each number to enter the password. Press OK again after the display shows …... HD Series. PASSWORD=? DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 21: Common Setup Menu
Enable RF Menu. Select Enable or Disable then press the OK button to set. Factory Default: Enable. Constellation Use the Scroll Up/Down button to select Constellation. Press the OK – button to enter the Constellation menu. Factory Default: QAM256. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 22: Encoder Setup Menu
Note: The Dual Input allows the installer to select a combination of Video Output formats. Some versions of this device will allow the user to have both outputs broadcasting in either MPEG2 or AVC (MPEG4) or a combination of both MPEG2 and AVC (MPEG4). DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... - Page 23 Back to Encoder- Select Back to Encoder to escape the Audio Setup Menu. Color Setup- Use the Scroll Up/Down button to select Color Setup Menu. Press the OK button to enter the Color Setup menu. Set the Color Setup using the Scroll Up/Down buttons to set. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019...
- Page 24 Press the OK button to enter the VCN(MAJOR CH NO) setup menu. Use the Scroll Up/Down to select the desired VCN(MAJOR CH NO) ranging from 1 to 999 then press OK to set. Factory Default: 102. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019...
-
Page 25: Ip Streaming Setup
Note: If DHCP is enabled you will not be able to set an IP address. Select DHCP disabled if Static IP Address required. IP Address Range(s): (1) 10.0.0.0 ~ 10.255..255.255 (2) 172.16.0.0 ~ 172.31.255.255 DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 26: Streaming Setup
Press the OK button to set. Default Settings: Unicast: 63. Multicast: 4. TTL Range: 1~ 255. Back to IP Streaming Setup- Select Back to IP Streaming Setup To escape the Streaming - IP Streaming Sub Menu. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... -
Page 27: Asi Output
EAS device the normal input video and audio would return to a normal operating mode. ****THIS DEVICE IS NOT AN EAS RECEIVER**** Note: It is the responsibility of the Installer/User to properly connect, verify, and test the EAS functionality of this device with the EAS receiver. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... - Page 28 EAS tests as required by the FCC or your specific Government Agency. If the EAS functions on this device fail for any reason it is the responsibility of the Installer/User to replace this device as required by the FCC or your specific Government Agency. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019...
-
Page 29: Product Notes
Accordingly, additional statements such as dealer advertising or presentations, whether oral or written, do not constitute warranties by the Company and should not be relied upon. This warranty gives you specific legal rights. You may also have other rights which vary from one jurisdiction to another. DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019... - Page 30 Item Value Password Serial Number Installation Date Purchase Date Video Input 1 Video Input 2 DT-IPTV-QAM-ASI-2H | Manual V1.0 | 01152019...