3.2 Rear panel
On the back of the unit the following items may be found:
Some of the following connectors might not be available depending on specific
models:
(14/35) - DRO installation - Installation/Operation - 10iE-20iE - (Soft: 01.xx)
1. Three-prong power connector for AC and ground connection.
2. M6 mm terminal for general machine ground connection.
3. Mounting bracket
X1.- SUB-D HD type 15-pin female connector for 1st axis feedback device.
X2.- (20iE). SUB-D HD type 15-pin female connector for 2nd axis feedback
device (scale or encoder).
X4.- SUB-D HD type 15-pin female connector for inputs and outputs.
X4