Polycom IP-321 Quick Reference Manual page 2

Barracuda Phone System
Press the Dial key to connect the remote party to the destination, and disconnect yourself from the call.
Ad-Hoc Conference / 3-Way Calling
Place (or receive) a call.
To add another party to the call, press the Conf soft key.
Enter the destination number or extension and press Dial.
When the destination party answers, press the Conf soft key again.
All parties now join in a 3-way call.
Do Not Disturb
To enable Do Not Disturb Mode, press Menu, select Features, then select Do Not Disturb.
To resume normal operation, select Do Not Disturb again. The phone now receives calls normally.
Call Forwarding
To enable call forwarding, press Menu, then select Features, then select Forward.
Select the type of forwarding to enable, then select a destination.
The phone display indicates when call forwarding is enabled.
To deactivate forwarding, press the Forward soft key, press the forwarding type, then press Disable.
Ringer and Handset Volume
To change the ringer volume, when the phone is idle, press the (–) or (+) button at the bottom of the
keypad.
To change the volume of a call, during an active call, press the (–) or (+) buttons to adjust the volume of
the handset, speakerphone, or headset, whichever is active.
Directories
To browse the phone contact list or call lists, press Menu, then Features, then Directories.
The call lists show missed, placed, and received calls.
Special Characters
When entering a destination with alphanumerics or special characters, be sure to pause momentarily
between key presses. For example, when dialing **<ext>, press *, pause for a moment, press * again,
then dial the extension.
Polycom IP-321-331-335 Quick Reference Guide
2 / 3