Section 2. Overview; Introduction; Description; Dimensions - Polaris PB4SQ Installation And Operation Manual

Polaris

Section 2. Overview

2.1

INTRODUCTION

This manual contains information for the proper
installation, operation and maintenance of the Polaris
PB4SQ booster pump.
2.2

Description

The Polaris PB4SQ Booster Pump,
supplies high pressure water for the
operation of pressure driven pool
cleaners. The PB4SQ is a multistage
booster pump. Hydraulic efficiency is
optimized by passing water through
four pressurization stages. At each
stage, water is moved through an
individual impeller and diffuser,
progressively increasing outlet
pressure without increasing motor
Revolutions Per Minute (RPM). This
allows a pressure operated cleaner
to run with optimal power while
minimizing energy consumption. The
pump is not self priming and should
only be used when the pool filtration
pump is on
2.3

Dimensions

13 5/8" (346 mm) 13 5/8" (346 mm)
|
PB4SQ™ Booster Pump Installation and Operation Manual
®
Outlet
Diffuser
Impeller
Inlet
16 3/16" (411 mm) 16 3/16" (411 mm)
ENGLISH
CAUTION
Running the booster pump without a filtration pump
will damage the booster pump. Improper operation
of the booster pump will void the warranty.
Stage 4
Stage 3
Stage 2
Stage 1
7 1/2" (191 mm)
6 3/8" (162 mm)
Anchor bolt hole centers
Page 5
Electric Motor
9 7/16" 9 7/16"
(240 mm) (240 mm)
4" 4"
(102 mm) (102 mm)