Troubleshooting Guide - Black + Decker YARDMASTER BCAST90 Instruction Manual

English

Troubleshooting Guide

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
For assistance with your product, visit our website at www.blackanddecker.com for a list of service centers, or call the
BLACK+DECKER Customer Care Center at 1-800-544-6986.
PROBLEM
- Unit will not start.
- Battery pack will not charge.
- Unit shuts off abruptly.
12
POSSIBLE CAUSE
- Battery pack not installed properly
- Battery pack not charged.
- Internal componets too hot.
- Attachment or extension pole not
attached to the base unit.
- Battery pack not inserted into charger.
- Charger not plugged in.
- Surrounding air temperature too hot
or too cold.
- Battery pack has reached its maximum
thermal limit.
- Out of charge. (To maximize the life of
the battery pack it is designed to shut off
abruptly when the charge is depleted.)
POSSIBLE SOLUTION
- Check battery pack installation
- Check battery pack charging requirements.
- Allow tool to cool down.
- Ensure attachemnt is properly seated
and locked into position on the
extension pole.
- Ensure extension pole is properly
seated and locked into position on the
base unit.
- Insert battery pack into charger until
LED illuminates.
- Plug charger into a working outlet. Refer
to Important charging notes for
more details.
- Move charger and battery pack to a
surrounding air temperature of above
40 °F (4,5 °C) or below 104 °F (40 °C).
- Allow battery pack to cool down.
- Place on charger and allow to charge.