Advertisement
Available languages
Available languages
ѥ
WARNING: To avoid serious personal injury, always remove the battery
pack from the tool when cleaning or performing any maintenance.
ѥ
WARNING: Always wear safety goggles or safety glasses with side shields
when using compressed air to clean the tool. If the operation is dusty, also wear
a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and may be damaged by
their use. Use clean clothes to remove dirt, dust, oil, grease, etc.
ѥ
WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. come in contact with plastic parts. Chemicals
can damage, weaken or destroy plastic which may result in serious
personal injury.
ѥ
WARNING: When servicing, use only identical craftsman replacement parts.
Use of any other parts may create a hazard or cause product damage. To
ensure safety and reliability, all repairs should be performed by a qualified
service technician.
PROBLEM
The impact driver does
not work
Bit cannot be installed
Motor overheating
MAINTENANCE
TROUBLESHOOTING
CAUSE
Battery is depleted
Coupler is not released
Bit does not fit
the coupler
Be sure cooling vents
are free from saw dust
and obstacles
15
SOLUTION
Charge the battery
Release the coupler
Use suitable bit
Clean, clear vents. Do not
cover vents with hand
during operation
Advertisement
