Table of Contents
Advertisement
Revision history
Version
Date
Rev 8
2018/12/10
Rev 7
2016/09/13
Rev 6
2016/01/29
Rev 5
2015/12/17
Rev 4
2015/11/09
Rev 3
2015/09/23
Rev 2
2015/09/18
Rev 1
2015/06/09
Rev 0
2015/05/12
SF20 Rangefinder - Product manual - Revision 8
Author
TLP
Updated branding and layout of this document has resulted in page number changes to
previous revision history entries.
Update the maximum readings per second from "18317" to "20010" (pages 3, 4, 6, 8, 9,
10). Removed the sentence "Both SF30 models have settings to smooth the distance
measurements if higher resolution is required or use the raw results if higher speed is
needed." (page 3). Update the FDA accession number "1410968-002 (2018/09)" in "2.
Specifications of the SF30" (page 4). Update the minimum range of "0.2" in "2.
Specifications of the SF30" (page 4). Updated references to the settings available
through the USB port. Removed references to "Synchronisation" logic level signal from
copy and Illustrations.
TLP
Updated FDA accession number "1630995-000 (2016/09)" in "Appendix A ::
Specifications" (page 14). Update maximum update rate from "18316" to "18317"
readings per second (pages 1, 3, 5, 8, 10, 11, 12, 14). Update rate modified from
"2289" to "1665" readings per second (pages 5, 8, 10, 11). Update rate modified from
"1144" to "832" readings per second (pages 5, 12).
TLP
Update FDA accession number "1410968-002 (2016/01)" in "Appendix A ::
Specifications" (page 14).
TLP
Updates to this document revision are applicable from SF30/* SN: S30-00491, firmware
revision 7.0. Update rate modified from "36633" to "18316" readings per second (pages
1, 3, 5, 8, 10, 11, 12, 14). Amended the "1: Active data port" values available (pages 5,
7). Amended references of "2: Snapshot resolution" to "2: Resolution / Smoothing
filter" (pages 5, 7, 8, 11). Amended the "2: Resolution / Smoothing filter" values
available (pages 5, 7, 10). Updated the lowest resolution to 0.25 m (pages 5, 8, 10, 11,
14). Amended references to serial port transmitting two bytes at all update rates (pages
8, 10). Add serial port command "#pn:" (page 10). Updated the resolution and update
rate in "Appendix A :: Specifications" (page 14). Amended the values relating to the
relationship between update rate and resolution (pages 5, 8, 10, 11). Noted that the
speed function is active only when the resolution is set to "0.03 m" or
"Smoothed" (pages 5, 7).
TLP
The amendments to this manual are applicable to SF30 serial numbers "SF30-00470"
onwards. Reformatted the "8: Alarm latch" command "#X:" to "#X" (pages 5, 10, 12).
Added new serial commands "N" and "Y" (page 10). Added new keyboard "hotkeys"
<X>, <Y> and <N> (page 12). Updated the minimum update rate for the serial, analog
and USB ports to 1 reading per second (pages 5, 8, 10, 12). Decrease the minimum
alarm activation distance to 0.5 meters (pages 5, 10). Amended details of the serial and
USB protocol to "8 data bits" and "8N1" (pages 7, 8). Amended details regarding USB
outputs at different update rates (page 7).
TLP
Reformatted the "8: Alarm latch" command "#X:" (pages 5, 10).
TLP
Update FDA accession number "FDA: 1410968-001 (2015/09)" in "Appendix A ::
Specifications" (page 14). Updated height dimension to "56.5 mm" (page 14).
TLP
Updated product part code "Main cable type 1, 35 cm" (page 15).
JEP
First edition
|
|
14
of
14
SF30 Accelerated laser rangefinder
Comments
© LightWare Optoelectronics (Pty) Ltd, 2018
Product manual
|
www.lightware.co.za
Advertisement
Table of Contents
