Table of Contents
Advertisement
On-Board Buzzer
Horn & Strobe
Remote Devices
Modbus Slave Port RS-485 port
BACnet Port
Q-Controller System Operation Manual
86550-001-000 Rev B
100 dBA at 10 cm, 3700 Hz Continuous
Two relay dry contact are for Horn and Strobe
Dedicated 24VDC terminals are supplied for connection to
standard strobe and horn set.
Maximum of 750mA on the 24VDC power supply
4x RS-485 Ports with QEL Controller Protocol
-
Available transmitter: Q5, Q8, QIRF...
Available I/O box: AI-Box, AO-Box, BI-Box, BO-Box
-
Responds as a Modbus Slave using RTU protocol. Q-Controller
supplies read status information only
RS-485 port
Connect to QEL BACnet/IP module BAC-Box
- 8 -
Advertisement
Table of Contents
