Setting
Display Description on
•
second row:
Display Software
•
version:
Display Sensor RS-485
•
port QoS:
Setting
Change TAB TextColor:
Other System Settings
5.2.3
Q-Controller System Operation Manual
86550-001-000 Rev B
There are three options for the second row display in the
tab [Monitoring], in normal monitoring mode, the
description is displayed.
If you want to check what software version in the
remote devices, you can choose "Display Software
version". This setting will be reset after the APP is
restarted.
If you want to display the Quality of Traffic or Network
Service in the remote devices, you can choose "Display
Sensor RS-485 port QoS". This setting will be reset after
the APP is restarted. The QoS reading of each remote
device can only be read out from performing the
function of "Poll Quality of Traffic..."
You can customize the text color in tab [Monitoring],
[Setup], [Testing], [Datalogging] and [System]
- 21 -
Description
Description