Table of Contents
Advertisement
Display Options
5.2.2
. Click [Display Options] to configure the Q-Controller display
Setting
Display Disabled
Channel:
Display Negative
Reading:
Display OFFLINE if AI
Input < 2.5mA:
Display Alarm Screen
and Wait for ACK:
Q-Controller System Operation Manual
86550-001-000 Rev B
When a remote module is connected and you may disable any
unused channels. If it's "Checked", the disabled channel will be
displayed in tab [Monitoring]. If it's "Unchecked", the disabled
channel will not appear in tab [Monitoring] screen.
It only works on the digital sensors and Analog Inputs value.
If it's "Unchecked", all negative readings will be displayed as "0"
The feature only works on the Analog Inputs value.
If it's "Checked", the AI channel will report "CH OFFLINE" when
the input signal is less than 2.5mA.
If it's "Unchecked", the reading will be zero or negative reading if
"Display Negative Reading" is "Checked".
When any alarm or output status changed, a red color flash
screen will be displayed if it's "Checked", it can only be cancelled
by clicking the right button [Acknowledge] to acknowledge the
alarms. If it's "Unchecked", no flash screen is popped up.
- 20 -
Description
Advertisement
Table of Contents
