Table of Contents
Advertisement
The pan-and-tilt drive is factory lubricated for the life of the unit and no maintenance is required under normal
operating conditions. The EV3000D pan and tilt motors are protected by limit switch for avoiding damages. Inspect the
pan/tilt unit every six months to ensure trouble free operation and an extended product life. Harsh environments
and/or continuous motion applications may require more frequent maintenance.
Do the following:
• Check the tension of the drive belt and adjust as necessary.
• Verify that there is lubricant on the gears.
Please be familiar with the instructions that follow before servicing the pan/tilt.
REMINDER: The warranty on any pan/tilt operated in continuous motion applications is six months after date of
shipment.
MECHANICAL
Pan: 360° endless movements / Speed: 0.1°/sec ~ 5.7 °/sec
Tilt: ±90° movement in vertical plane / Speed: 0.1°/sec ~ 3°/sec
Max. Load: 220 lb (99.80 kg)
Gearing: Drift-free hardened worm gear.
Pan: Heavy duty ball bearings and Slip-ring for endless pan operation
Braking: Mechanical (Worm-Gear Structural)
ELECTRICAL
Input Voltage: 90-230VAC, 50/60Hz, or 230 VAC required for Water-Pump (Optional Parts)
Connector: Mil-Spec Connector
Motors: 200W BLDC Motors
Limit Switches for Preventing Damage of Unit
GENERAL
Construction: Stainless Steel Rated SUS316L Material
Environment: Indoor/outdoor operation
Temperature: -10° to 140°F (-23° to 60°C)
Weight: Approx. 69 lb (31.03 kg)
Shipping Weight: 220 lb (99.80 kg)
Dimensions: 955(L)ⅹ970(H)ⅹ709(W) (See Figure 6)
Design and product specifications are subject to change without notice.
Advertisement
Table of Contents
