Table of Contents
Advertisement
UNPACKING AND INSPECTION
All United Vision equipment is tested and inspected before leaving the factory. It is the carrier's
responsibility to deliver the equipment in the same condition as it left the factory.
INSPECTION FOR VISIBLE DAMAGE
Immediately inspect the cartons upon delivery. Make a note of any visible damage on all copies of the
carrier's freight bill. Make sure the carrier's agent (the person making the delivery) signs the note on all
copies of the bill. If the agent does not have claim forms, contact the carrier's office.
INSPECTION FOR CONCELED DAMAGE
As soon as possible after delivery, unpack the unit and inspect it for concealed damage. Do not discard the
carton or packing materials. If the unit is damaged, contact the carrier immediately and request form for
filing a damage claim. Make arrangements for a representative of the carrier to inspect the damaged
equipment. If the equipment must be returned for repair, follow the shipping Instructions at the end of this
manual.
MOUNTING THE UNIT
Figure 1. Mounting Hole Dimensions
The EV3000D will operate safely with loads up to 220 pounds (99.80 kg) . To perform properly, the unit must
be securely fastened to a suitable surface and the camera or housing must be properly mounted and balanced
on the unit.
The pan-and-tilt has been assembled at the factory for upright mounting and should be mounted directly to a
surface capable of supporting the combined weight (App. 260kg) of the pan-and-tilt and its accessories. The
EV3000D weighs pounds (260 kg).
According to the mounting pattern shown in Figure 1, Screws should be long enough to accommodate lock
washers and nuts. Install according to manufacturer's instructions.
Advertisement
Table of Contents
