Kohler K-10550 Installation Manual page 9

Screws
11. Install the Tumbler Holder
Start a setscrew into the post. Do not thread fully into the post.
If included, place an escutcheon on the wall plate.
NOTE: The escutcheon sits loosely until the post is in place and the
setscrew is tightened.
Align the tumbler holder assembly over the wall plate.
Tighten the setscrew with a hex wrench.
Insert the glass tumbler into the holder.
Kohler Co.
Tumbler Holder
Tumbler
Anchors
Plate
Insert
Tumbler
Setscrew
Holder
9 1023327-2-B