Kohler K-10550 Installation Manual page 10

Screws
12. Install the Soap Dish
Start a setscrew into the post. Do not thread fully into the post.
If included, place an escutcheon on the wall plate.
NOTE: The escutcheon sits loosely until the post is in place and the
setscrew is tightened.
Align the soap dish assembly over the wall plate.
Tighten the setscrew with a hex wrench.
Place the soap dish in the holder.
1023327-2-B
Soap Dish Holder
Soap Dish
Anchors
Plate
Insert
Soap Dish
Setscrew
Holder
10 Kohler Co.